Water Main Flushing Program

Sediment and mineral build-up in the water main system needs to be periodically flushed out in order to maintain good water quality. This done by adjusting the valves in the water system and opening fire hydrants to allow large quantities of water to flow through the pipes at high velocities.

During the period the water main in your block is flushed, your water may become cloudy. Cloudy water is not a health concern and can be cleared by running your cold water taps for approximately 10-20 minutes after the crew has finished flushing.

You may also experience low water pressure or no water pressure during the flushing. You will have received a notice from Waterworks alerting you to the times flushing is taking place in your area. If you are still have low water pressure or no water at the end of day of flushing please call .

The 2011 Fall Flushing Program will run September 26 to December 2, 2011.

Please note: Your water will not be shut off for the main cleaning (flushing) program.

[top]